SW2624HIPOE-MGF-360-DIN - White Brand PoE Switch, DIN rail mount, 24 Gigabit…
SW2624HIPOE-MGF-360-DIN
€817.96
€1,258.40
35%
Tax included
White Brand PoE Switch - DIN rail mount - 24 Gigabit Ports + 4 Gigabit SFP - 90W ports 1-2 23-24/30W ports 3-22 /Max 360W - IEEE802.3af/at/bt | PoE/PoE+/Hi-PoE - VLAN/STP/RSTP/MSTP/ERPS/SNMP/ACL - Static LAG/IGMP Snooping/DHCP Snoop/802.1x
- White Label
- Manageable Desktop Switch
- 20 Ports RJ45 Gigabit PoE+ 802.3.af/at + 4 Gigabit Hi-PoE Ports
- 4 Gigabit SFP Ports
- Supports PoE power up to 360 W total for all ports
- Up to 90W on port 1-2 and 23-24
- Up to 30W on ports 3-22
- Compatible with PoE IEEE802.3af/at and Hi-PoE
- DIN rail mount
Features
- White Brand PoE Switch - DIN rail mount
- 24 Gigabit Ports + 4 Gigabit SFP
- 90W ports 1-2 23-24/30W ports 3-22 /Max 360W
- IEEE802.3af/at/bt | PoE/PoE+/Hi-PoE
- VLAN/STP/RSTP/MSTP/ERPS/SNMP/ACL
- Static LAG/IGMP Snooping/DHCP Snoop/802.1x
Specs
Interface | 24 Ports RJ45 Gigabit + 4 SFP Gigabit Ports |
PoE characteristics | Up to 90W ports 1-2 and 23-24 IEEE802.3bt Hi-PoE Up to 30W ports 3-22 IEEE802.3af/at PoE/PoE+ Maximum 360W |
Supported Topologies | Ring / Star / Bus / Tree |
Physical Layer Protocols | MDX/MDIX/Flow Control |
Network Protocols | VLAN/STP/RSTP/MST/ERPS/SNMP/IGMP Snooping/802.1x/Port Isolation/QinQ |
Management Protocols | SNMP/CLI/Console/WebUI/SSH/Telnet/Rmon |
Quality of service | Highlighting and priority mapping Supports SP and WRR algorithms Rate limit QoS-based policies |
Link Aggregation | Up to 12 groups |
Jumbo Frame | 10Kbyes |
ACL | Supports 500 ACL of standard and extended type |
Switching Capacity | 68Gbps |
MAC Table | 16K |
Packet Forwarding Rate | 50,59Mbps |
Buffer | 12M |
Installation | DIN rail |
Power | DC 48 V ~ 58 V- The equipment does not include power supply. The following references are recommended: - DC48V5A-DIN |
Dimensions | 108 (D) x 104 (H) x 143 (W) mm |
Weight | 1,3 Kg |
Operating temperature | -40º C ~ 75º C |
Relay Output | Switch failure is reported via relay. The relay interface can be connected to a buzzer or other monitoring devices to achieve the physical layer shutdown alarm function. When the switch is off, RELAY1 and RELAY2 will change to the connected state and, therefore, the buzzer will sound and the monitoring devices will detect the switch failure and report the errors to the data center. This output cannot be configured at software level. |
Package content
- White Brand PoE Switch
- User instructions
Summary
0
(0 Reviews)
Select a row below to filter reviews.
Only users who already bought the product can add review.
No customer reviews for the moment.